Aspire Nautilus AIO Pod Starter Kit
For all those fans of Aspire Nautilus range of tanks, Aspire brings you the new Aspire Nautilus AIO Pod Starter Kit. Another new design pod system that is slim and stylish.
The Aspire Nautilus AIO Pod Starter Kit has an easy to fill 4.5 pod cartridge, it fits comfortably in the hand and when in use is very discreet.
The Aspire Nautilus AIO pod atomizer is the famous and popular Nautilus BVC coil, it also uses nichrome wire.
The Aspire Nautilus AIO pod comes supplied with two coils both rated at 1.8 ohms, one for regular e-liquid and one for use with nicotine salts, though it works equally well with normal e-liquid.
Charging the Aspire Nautilus AIO is also very simple. Just plug in the supplied micro usb cable into the side of the mod, attach the other end to a suitable power supply to charge. The maximum charge current can reach up to 1A.
When attached to the usb with the power on the LEDs will flash blue and orange three times, when fully charges the LEDs will flash blue and orange twenty times then remain off.
Whatever type of coil you use, the standard Nautilus BVC or the nic-salts Nautilus BVC replacement coils, both are extremely easy to install.
Simply remove the pod by squeezing the side buttons on the device, then remove the pod and turn it upside down, remove the chimney unit and screw in your chosen coil. Replace the chimney unit with attached coil and reinsert into the pod. Push the pod back into the Aspire Nautilus AIO until it clicks.
Note: when inserting a new coil and filling the pod, always let the device stand for 3-5 minutes to allow the coil to become saturated. This will help avoid dry hits and damage to the coil.
In The Box
- 1 x Aspire Nautilus AIO device
- 2 x Aspire Nautilus BVC 1.8ohm coils (1 regular BVC & 1 for Nic Salt)
- 2 x Extra O rings
- 1 x Silicone seal
- 1 x Micro USB Cable
- 1 x Warranty Card
- 1 x User Manual